Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Powertrain Management > Transmission Control Systems > Relays and Modules - Transmission and Drivetrain > Relays and Modules - Differential > Control Unit, Differential Lock > Component Information > Diagrams > Page 2279

Page 1
background image

Control Unit: Service and Repair

Differential Lock Control Unit: Removal and Installation

REMOVAL

1) Disconnect the battery cable from the negative terminal.
2) Remove jack and tools.
3) Remove upper bracket of center seat belt retractor and belt assembly. 
4) Remove the necessary push pins and reposition rear panel out of the way. 
5) Reposition the carpet to access differential lock control unit to disconnect connector.

6) Remove the two nuts and remove differential lock control unit.

INSTALLATION

Note the following, and installation is in the reverse order of removal.
^

When installing differential lock control unit, tighten nuts to the specified torque.

Differential lock control unit nuts: 5.1 Nm (0.52 kg-m, 45 in-lb).

Powertrain Management > Transmission Control Systems > Relays and Modules - Transmission and Drivetrain > Relays and Modules - Differential > Control Unit, Differential Lock > Component Information > Diagrams > Page 2279

[PREV PAGE] [NEXT PAGE]