Equator 2WD V6-4.0L (2009)
Powertrain Management > Tune-up and Engine Performance Checks > Valve Clearance > System Information > Specifications > Page 1643
Valve Clearance: Service and Repair
Camshaft Valve Clearance
1) Remove the engine room cover.
a) Set No. 1 cylinder at TDC of its compression stroke.
Rotate crankshaft pulley clockwise to align timing mark (A) (grooved line without color) with timing indicator (B).
Make sure that intake and exhaust cam noses on No. 1 cylinder (engine front side of RH bank) are located as shown.
|[PREV PAGE] [NEXT PAGE]|