Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Service and Repair > Removal and Replacement > Page 344

Page 7
background image

Tool number : -(J-45722)

12. Disconnect the EVAP hose from the molded clip in the top of the fuel tank.
13. Remove the fuel level sensor, fuel filter, and fuel pump assembly. Remove and discard the fuel level sensor, fuel filter, and fuel pump assembly

O-ring.

CAUTION:
-

Do not bend the float arm during removal.

-

Avoid impacts such as dropping when handling the components.

INSTALLATION

Installation is in the reverse order of removal.

-

For installation, use a new fuel level sensor, fuel filter, and fuel pump assembly O-ring.

-

Connect the quick connector as follows:

a. Check the connection for any damage or foreign materials.
b. Align the connector with the pipe, then insert the connector straight into the pipe until a click is heard.
c. After connecting the quick connector, make sure that the connection is secure by checking as follows:

Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Service and Repair > Removal and Replacement > Page 344

[PREV PAGE] [NEXT PAGE]