Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Starting and Charging > Power and Ground Distribution > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 3525

Page 2
background image

CAUTION:

-

If fusible link should melt, it is possible that critical circuit (power supply or large current carrying circuit) is shorted. In such a case,
carefully check and eliminate cause of malfunction.

-

Never wrap outside of fusible link with vinyl tape. Important: Never let fusible link touch any other wiring harness, vinyl or rubber parts.

Harness Connector Description

Harness Connector: Description

HARNESS CONNECTOR (TAB-LOCKING TYPE)

-

The tab-locking type connectors help prevent accidental looseness or disconnection.

-

The tab-locking type connectors are disconnected by pushing or lifting the locking tab(s).

Refer to the figure below.

Refer to the next diagram for description of the slide-locking type connector.

CAUTION:  Do not pull the harness or wires when disconnecting the connector.

[Example]

Starting and Charging > Power and Ground Distribution > Relays and Modules - Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 3525

[PREV PAGE] [NEXT PAGE]