suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Power Steering Pump|Service and Repair > < Power Steering Pump|Testing and Inspection
Page 2
background image

3) With the engine at idle, close the shut-off valve and read the relief oil pressure.

Relief oil pressure: 8.0 - 8.8 mPa (81.60 - 89.76 kg/cm2, 1160 - 1276 psi)

CAUTION:
Do not close the shut-off valve of the pressure gauge for more than 10 seconds.

4) After measurement, open the shut-off valve slowly. 

^

If relief oil pressure is outside the specification, replace the power steering oil pump. 

5) After inspection, disconnect the oil pressure gauge and oil pressure gauge adapter from the hydraulic circuit, then connect the power steering oil

pump discharge connector. Add fluid and bleed the air from the hydraulic circuit thoroughly.

Power Steering Pump|Service and Repair > < Power Steering Pump|Testing and Inspection