Equator 2WD V6-4.0L (2009)
Steering and Suspension > Suspension > Suspension Strut / Shock Absorber > Component Information > Service and Repair > Front Suspension > Page 3923
Suspension Strut / Shock Absorber: Service and Repair
Shock Absorber: Removal and Installation
1) Support the rear final drive and suspension assembly using a suitable jack.
3) Remove the shock absorber.
INSPECTION AFTER REMOVAL
Inspect the shock absorber for any oil leaks, cracks, or deformations. Replace the shock absorber as necessary.
Installation is in the reverse order of removal.
Shock absorber upper and lower nuts : Refer to [Rear Suspension Assembly: Component].
|[PREV PAGE] [NEXT PAGE]|