Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Steering and Suspension > Wheels and Tires > Wheel Hub > Component Information > Testing and Inspection

Page 1
background image

Wheel Hub: Testing and Inspection

Wheel Hub: On-Vehicle Inspection and Service

Make sure the mounting conditions (looseness, backlash) of each component and component status (wear, damage) are normal.

WHEEL BEARING INSPECTION

^

Move wheel hub in the axial direction by hand. Make sure there is no looseness of wheel bearing.

Axial end play limit: 0.05 mm (0.002 in) or less

^

Rotate wheel hub and make sure there is no unusual noise or other irregular conditions. If there are any irregular conditions, replace wheel hub and
bearing assembly.

Steering and Suspension > Wheels and Tires > Wheel Hub > Component Information > Testing and Inspection

[PREV PAGE] [NEXT PAGE]