Equator 2WD V6-4.0L (2009)
Transmission and Drivetrain > Automatic Transmission/Transaxle > Control Module, A/T > Component Information > Service and Repair > Page 2320
Make sure that turbine revolution sensor is securely installed into turbine revolution sensor hole.
Hang down revolution sensor harness toward outside so as not to disturb installation of control valve with TCM.
Adjust A/T assembly harness connector of control valve with TCM to terminal hole of transmission case.
Assemble it so that manual valve cutout is engaged with manual plate projection.
|[PREV PAGE] [NEXT PAGE]|