Equator 2WD V6-4.0L (2009)
Transmission and Drivetrain > Differential Assembly > Fluid - Differential > Component Information > Service and Repair > Procedures > Page 2598
3. Install the drain plug with sealant applied on the threads to the rear final drive assembly. Tighten to the specified torque. Refer to [Rear Final
Drive: Disassembly and Assembly].
Use High Performance Thread Sealant or equivalent. Refer to [Recommended Chemical Products and Sealants]
1. Remove the filler plug from the rear final drive assembly.
|[PREV PAGE] [NEXT PAGE]|