Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Service and Repair > Removal and Replacement > Page 2779

Page 4
background image

Installation is in the reverse order of removal.
^

After installation, check for vibration by driving the vehicle.

CAUTION:
Do not reuse the bolts and nuts. Always install new ones.

2S1330 Type

Propeller Shaft: Removal and Installation

COMPONENTS

REMOVAL

1) Move the A/T select lever to the N position and release the parking brake.
2) Put matching marks on the rear propeller shaft flange yoke and the rear final drive companion flange as shown.

Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Service and Repair > Removal and Replacement > Page 2779

[PREV PAGE] [NEXT PAGE]