Equator 2WD V6-4.0L (2009)
Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Testing and Inspection > Symptom Related Diagnostic Procedures > Page 2764
4) After installation, check for vibration by driving the vehicle.
Propeller Shaft: On-Vehicle Service
APPEARANCE AND NOISE INSPECTION
Check the propeller shaft tube surface for dents or cracks. If damaged, replace the propeller shaft assembly.
Check the bearings for noise and damage. Repair or replace the bearings as necessary.
PROPELLER SHAFT VIBRATION
If a vibration is present at high speed, inspect the propeller shaft runout first.
|[PREV PAGE] [NEXT PAGE]|