Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Testing and Inspection > Symptom Related Diagnostic Procedures > Page 2772

Page 10
background image

4) After installation, check for vibration by driving vehicle.

3S1330-2BJ100 Type

Rear Propeller Shaft: On-Vehicle Service

APPEARANCE AND NOISE INSPECTION

Check the propeller shaft tube surface for dents or cracks. If damaged, replace the propeller shaft assembly.

PROPELLER SHAFT VIBRATION

If a vibration is present at high speed, inspect the propeller shaft runout first.
1) Measure the runout of the propeller shaft tube at several points by rotating the final drive companion flange with your hands.

Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Testing and Inspection > Symptom Related Diagnostic Procedures > Page 2772

[PREV PAGE] [NEXT PAGE]