Equator 2WD V6-4.0L (2009)
Transmission and Drivetrain > Drive Axles, Bearings and Joints > Axle Shaft Assembly > Component Information > Service and Repair > Rear (C200 Type) > Page 2707
A: - (J-26941 part of J-46215)
Do not reuse the axle oil seal once it is removed. Always install a new axle oil seal.
Apply a constant pressure on the slide hammer while turning the slide hammer 180 degrees periodically while pulling the axle oil seal out.
8) Remove the ABS sensor rotor using Tool. Discard the ABS sensor rotor.
|[PREV PAGE] [NEXT PAGE]|