Equator 2WD V6-4.0L (2009)
Transmission and Drivetrain > Manual Transmission/Transaxle > Fluid - M/T > Component Information > Service and Repair > Procedures > Page 2869
1. Remove the filler plug. Fill with new oil until oil level reaches the specified limit near the filler plug hole.
Oil grade and Viscosity: Refer to [Recommended Fluids and Lubricants].
2. After refilling the oil, check oil level. Set a gasket to the filler plug, then install it to the transmission. Tighten the filler plug to the specified torque.
Refer to [Transmission Assembly: Disassembly and Assembly].
CAUTION: Do not reuse gasket.
|[PREV PAGE] [NEXT PAGE]|