Equator 2WD V6-4.0L (2009)
Transmission and Drivetrain > Manual Transmission/Transaxle > Shifter M/T > Component Information > Service and Repair > FS5R30A Type > Page 2883
4) Remove the clip (B) and then separate the boot from the control housing.
Installation is the reverse order of removal.
Do not reuse the clip and snap ring.
Apply cement to threads of the shift lever assembly.
When shift lever assembly is shifted to each position, make sure there is no binding or disconnection in either boot.
|[PREV PAGE] [NEXT PAGE]|