Equator 2WD V6-4.0L (2009)
Transmission and Drivetrain > Transmission Control Systems > Relays and Modules - Transmission and Drivetrain > Relays and Modules - Differential > Control Unit, Differential Lock > Component Information > Diagrams > Page 3023
Control Unit: Service and Repair
Differential Lock Control Unit: Removal and Installation
1) Disconnect the battery cable from the negative terminal.
6) Remove the two nuts and remove differential lock control unit.
Note the following, and installation is in the reverse order of removal.
When installing differential lock control unit, tighten nuts to the specified torque.
Differential lock control unit nuts: 5.1 Nm (0.52 kg-m, 45 in-lb).
|[PREV PAGE] [NEXT PAGE]|