Equator 4WD V6-4.0L (2010)
Remote Switch: Service and Repair
Premium Audio System (Crew Cab)
Steering Switch: Removal and Installation
Removal and Installation
Removal
1. Remove the driver air bag module. Refer to [Driver Air Bag Module: Removal and Installation].
2. Remove the steering wheel audio control switch assembly screws.
3. Disconnect the steering wheel audio control switches connector.
4. Remove the steering wheel audio control switches by pulling on steering wheel audio control switches to release the pawls.
CAUTION: Do not tilt steering wheel audio control switches during removal or damage may occur to the pawls.