Equator 4WD V6-4.0L (2010)
Seals and Gaskets: Service and Repair
Front Differential (R180 Type)
Front Oil Seal: Removal and Installation
Front Oil Seal: Removal and Installation
Removal
1) Remove the drive shafts from the front final drive assembly.
2) Remove the front propeller shaft from the front final drive assembly.
3) Measure the total preload torque.
NOTE:
Record the total preload torque measurement.
4) Remove the drive pinion lock nut using suitable tool.
5) Put matching marks on the companion flange and drive pinion using paint.
CAUTION:
Use paint to make the matching marks. Do not damage the companion flange or drive pinion.
6) Remove the companion flange using suitable tool.