Esteem L4-1590cc 1.6L SOHC 0 MFI 16V (1995)
8. Remove intake manifold rear stiffener bolt, generator adjust arm reinforcement bolt and right mounting bracket stiffener bolt from intake manifold.
9. Remove intake manifold with throttle body from cylinder head, and then its gasket.
INSTALLATION
Reverse removal procedure for installation noting the followings:
-
Use new intake manifold gasket.
-
When installing intake manifold, install clamps at positions as shown in image.
-
Adjust accelerator cable play.
-
Check to ensure that all removed parts are back in place. Reinstall any necessary parts which have not been reinstalled.
-
Refill cooling system.
-
Upon completion of installation, turn ignition switch ON but engine OFF and check for fuel leaks.
-
Finally, start engine and check for engine coolant leaks.
