Do Not Sell My Personal Information
suzuki Workshop Repair Guides

Suzuki Workshop Manuals

NEXT PAGE >
Page 1
background image

ABS Main Relay: Testing and Inspection
ABS Fail-Safe Relay

INSPECTION 

1) Disconnect negative cable from battery. 
2) Remove fail-safe relay from relay box. 

3) Check resistance between each two terminals.

Between "1" and "3": 78 - 96 ohms at 20°C, 68°F
Between "2" and "5": Continuity
Between "4" and "5": No continuity

4) Check that there is continuity between terminals "4" and "5" when battery is connected to terminals "1" and "3".

If check result is not as specified in Step 3) and 4), replace.

Relays and Modules > Relays and Modules - Brakes and Traction Control > ABS Main Relay > Component Information > Testing and Inspection > ABS Fail-Safe Relay

NEXT PAGE >