Esteem L4-1590cc 1.6L SOHC 0 MFI 16V (1995)
3. Remove flanges, discs and plate of coast clutch by removing snap ring in following order. (1) Flange -> (2) Disc -> (3) Plate -> (4) Disc -> (5)
Flange.
NOTE: Measure thickness of removed flange (1) and record for reference of piston stroke confirmation.
4. Using Special Tool (A): 09926-98310, or equivalent and hydraulic press, compress overdrive clutch return spring and remove snap ring.
CAUTION: Be careful when applying pressure, for overpressure will cause plate section of overdrive clutch return spring to deform.
5. Remove overdrive clutch return spring.
6. install forward clutch assembly, coast clutch piston with overdrive clutch piston installed.
7. Remove coast clutch piston with O-rings installed using compressed air (57 - 113 psi) through oil hole (A).
8. Remove O-rings from coast clutch piston.
NOTE: Never reuse O-rings after removal.
9. Remove overdrive clutch piston with O-rings installed using compressed air (57 - 1 13 psi) through oil hole (A).
10. Remove O-rings from overdrive clutch piston.
NOTE: Never reuse O-rings after removal.
