Esteem GL Sedan L4-1.8L (1999)
Rear Door Window Glass: Service and Repair
Removal
1. Remove window regulator handle (2).
For its removal, pull off snap by using a cloth (1) as shown in the figure.
2. Remove inner garnish (1) and clips (3).
3. Remove inside handle assembly mounting screw, and remove inside handle assembly (2) from door trim by sliding it forward.
4. Remove door trim.
5. Disconnect power window switch coupler (if equipped).
6. Remove door sealing cover.
7. Remove rear door center pillar garnish (1).
CAUTION: When removing center pillar garnish, slide it down first. Attempting removal without doing so will cause claws on the back of center
pillar.
8. Remove outer garnish.