Esteem GL Sedan L4-1.8L (1999)
1. Check that match mark on crank timing sprocket is in match with timing mark on lower crankcase as shown in figure.
2. Check that arrow mark on idler sprocket faces upward as shown in figure.
3. Check that knock pins of intake and exhaust camshafts are aligned with timing marks on cylinder head as shown in figure.
4. Install 2nd timing chain by aligning yellow plate of 2nd timing chain and match marks on idler sprocket.
5. Install sprockets to intake and exhaust camshafts by aligning dark blue plate of 2nd timing chain, match marks on intake sprocket and exhaust
sprocket respectively.
CAUTION: Do not turn mere than allowable turning range. If turned excessively, valve and piston may got damaged.
NOTE: As an arrow mark Is provided on both sides, camshaft timing sprocket has no specific Installation direction.