Esteem GL Sedan L4-1.8L (1999)
8. Remove crankshaft pulley bolt.
To lock crankshaft pulley, use special tool (camshaft pulley holder) with it as shown in figure.
Special Tool
(A): 09917-68221
NOTE: Be sure to use the following bolts instead of pins for fixing special tool to crankshaft pulley.
Bolt size: M8, P1.25 l = 25 mm (0.98 inch)
Strength: 7T
9. Remove crankshaft pulley.
To remove crankshaft pulley, use special tools (Steering wheel remover, Bearing puller attachment) with it as shown in figure.
Special Tools
(A): 09944-36011
(B): 09926-58010
10. Remove oil pan. Refer to Oil Pan, Engine.
When remove mounting member, use lifting device instead of engine support jack.
11. Remove engine front torque bush, rear mounting and rear mounting No.2 bracket.