Esteem GL Sedan L4-1.8L (1999)
NOTE: Before installing timing chain cover, check that pin Is securely fitted.
Tightening Torque (a): 11.0 Nm (1.1 kg-m, 8.0 ft. lbs.)
3. Install generator belt idler pulley. Tighten nut to specified torque.
Tightening Torque (a): 45 Nm (4.5 kg-m, 33.0 ft. lbs.)
4. Install generator belt tensioner.
Tighten bolts to specified torque.
Tightening Torque (b): 25 Nm (2.5 kg-m, 18.5 ft. lbs.)
5. Install water pump pulley.
6. Install engine RH mounting. Tighten bolts and nut to specified torque.
Tightening Torque (a): 55 Nm (5.5 kg-m, 40.0 ft. lbs.)
7. Install A/C compressor and compressor bracket.
8. Install engine front torque bush, rear mounting and rear No.2 mounting bracket.
9. Install oil pan. Refer to Oil Pan, Engine.