Esteem GL Sedan L4-1.8L (1999)
Cleaning
Clean passages by blowing compressed air.
NOTE:
-
MAF sensor, TP sensor, or other components containing rubber must not be placed in a solvent or cleaner both. A chemical reaction will cause
these parts to swell, harden or get distorted.
-
Don't put drills or wires into passages for cleaning. It causes damages in passages.
Installation
1. Clean mating surfaces and install throttle body gasket to intake manifold.
Use new gasket.
2. Install throttle body to intake manifold and tighten bolts.
3. Connect coolant hoses and breather hose.
4. Connect couplers of TP sensor and MAF sensor.
5. Install air cleaner outlet hose and clamp securely.
6. Connect intake air temperature sensor connector securely.