Esteem GL Sedan L4-1.8L (1999)
Tie Rod End: Service and Repair
REMOVAL
1. Jack up vehicle and remove wheel.
2. Remove split pin and tie end castle nut.
3. Using special tool, remove tie rod end from knuckle.
Special Tool:
(A): 09913-65210
4. To facilitate adjustment after installation, put a mark on tie rod thread indicating position of tie rod end lock nut. Then loosen lock nut and remove
tie rod end from tie rod.
INSPECTION
Tie-rod End Ball Joint
Inspect for play in tie-rod end ball joint. If found defective, replace.
INSTALLATION