Esteem GL Wagon L4-1.6L (1998)
1. Drive in a new No. 1 bush by using adequate drive handle and hammer and then apply grease to bush inside.
Special Tool
(A): 09943 - 88211
(B): 09923 - 46020 or the like
"A": SUZUKI SUPER GREASE A, 99000 - 25010
2. Install release shaft with return spring applied to it.
3. Apply grease to No.2 bush inside and press-fit it by using the same special tool as in removal.
"A": SUZUKI SUPER GREASE A
Special Tool (C): 09922 - 46010
4. Coat grease to shaft seal and then install it till it is flush with case surface. Use special tool for this installation and face seal lip downward (inside).
"A": SUZUKI SUPER GREASE A