Esteem GL Wagon L4-1.8L (1999)
2. Put brake shoe hold down spring back to its original position as shown. (Put shoe hold down spring in place by moving shoe [ever so that shoe
lever comes to the side of shoe hold down spring.)
3. Install brake drum after making sure that inside of brake drum and brake shoes are free from dirt and oil.
4. Upon completion of all jobs, depress brake pedal with about 30 kg (66 lbs.) load three to ten times so as to obtain proper drum-to-shoe clearance.
Adjust parking brake cable.
5. Install parking brake lever cover.
6. Install wheel and tighten wheel nuts to specified torque.
Tightening Torque (a): 85 Nm (8.5 kg.m, 61.5 ft. lbs.)
7. Check to ensure that brake drum is free from dragging and proper braking is obtained. Then remove vehicle from hoist and perform brake test
(foot brake and parking brake).
