Esteem GL Wagon L4-1.8L (1999)
Re-assembly of Steering Gear
9.
Apply Multi-purpose Wheel Bearing Grease # 2 to the external surface of the special tool "Pinion oil seal protector" and place on the input side of
the valve assembly.
CAUTION:
Make sure there is no damage on the external surface of the special tool that may damage the oil seal.
SERVICE MATERIAL:
Multi-purpose Wheel Bearing Grease # 2 grade
10.
Insert the valve assembly into the valve housing until the spacer contacts with the face of the housing.
CAUTION:
Do not damage the seal rings on the valve sleeve assembly.
11.
Apply Liquid Gasket Three Bond 1105 or equivalent on the sealing surface to the valve housing.
SERVICE MATERIAL:
Permatex 90062, Liquid gasket Three Bond
1105 or equivalent
CAUTION:
Make sure there is no oil and/or dirty material on the surface of the valve housing before applying liquid gasket.