Esteem GL Wagon L4-1.8L (1999)
Note:
Power steering assemblies other than those described in this bulletin are not applicable to this seal replacement procedure, because the construction
of the valve housing differs. Please refer to the illustrations for visual identification.
APPLICATION VIN RANGES
The applicable steering assemblies are found on 1995-1998 and some 1999 Esteem (SY) models.
STEERING GEAR REMOVAL & INSTALLATION
Refer to section 3B1 of the appropriate Esteem Service Manual for Rack & Pinion removal and installation.
1995-1998
99500-60G00
1999
99500-65D10-33E
After removing the steering gear from the vehicle, continue with the Oil Seal replacement procedure listed in this bulletin.
Disclaimer
Disassembly
Removal of Valve Housing
1.
Secure the steering gear in a vise.
2.
Loosen the adjuster lock nut and adjusting plug.