Esteem GL Wagon L4-1.8L (1999)
Suspension Strut / Shock Absorber: Service and Repair
Rear Strut
REAR STRUT ASSEMBLY
REMOVAL
NOTE: When servicing component parts of strut assembly, loosen strut upper nut a little before removing strut assembly. This will make service
work easier. Note, however, nut must not be removed at this point.
1. Hoist vehicle, allowing rear suspension to hang free.
2. Remove wheel.
3. Remove E-ring securing brake hose. Disconnect brake pipe from wheel cylinder and put wheel cylinder bleeder plug cap onto pipe to prevent fluid
from spilling.