Esteem GL Wagon L4-1.8L (1999)
Wheel Bearing: Service and Repair
Front
REMOVAL
NOTE: Once bearing outer race is removed, bearing set (outer race, bearings and inner races) should be replaced with new one.
1. Remove outside oil seal, snap ring, outside bearing and inside oil seal in that order.
2. After removing inside oil seal, remove bearing outer race/inner bearing using special tools (B) and (C), and hydraulic press.
Special Tool
(B): 09944-68510
(C): 09924-74510 or equivalents.
INSTALLATION
NOTE: When replacing bearing, inner race or outer race, be sure to replace them with new ones as a set.
1. Press-fit bearing outer race/inner bearing using special tools (C), (D) and (E).
Special Tool
(C): 09924-74510
(D): 09951-16090
(E): 09944-66010 or equivalents.