Esteem GLX Sedan L4-1.8L (1999)
2. With painted mark on stabilizer bar and end face of mount bushing aligned, tighten mount bracket bolts to specified torque.
NOTE: If painted mark has faded out, align the vehicle center and the center of stabilizer bar.
Tightening Torque (a): 23 Nm (2.3 kg-m, 17.0 ft. lbs.)
3. Tighten each nut to specified torque. When tightening, hold stud with wrench.
NOTE: Use new nuts.
Tightening Torque (b): 50 Nm (5.0 kg-m, 36.5 ft. lbs.)