Esteem GLX Sedan Plus L4-1.8L (1999)
"A": Sealant 99000-31090
2. Tighten wheel cylinder to brake back plate to specified torque.
3. Torque flare nut (or nuts) of brake pipe which was connected in step 1) to specification.
Tightening Torque
(a): 12 Nm (1.2 kg.m, 9.0 ft. lbs.)
(b): 16 Nm (1.6 kg.m, 11.5 ft. lbs.)
4. Install bleeder plug cap taken off from pipe back to bleeder plug.
5. For procedure hereafter, refer to steps 1) to 3) of BRAKE SHOE INSTALLATION.
NOTE: Be sure to bleed brake system.
