Esteem GLX Sedan Plus L4-1.8L (1999)
10. Install crankshaft pulley. To lock crankshaft pulley, use special tool (camshaft pulley holder) with it as shown in figure.
Special Tool
(A): 09917-68221
NOTE: Be sure to use the following bolts instead of pins for fixing special tool to crank pulley.
Bolt size: M8, P1.25 l = 25 mm (0.98 inch)
Strength: 7T
Tightening Torque (a): 150 Nm (15.0 kg-m 108.5 ft. lbs.)
11. Install generator belt.
12. Refill cooling system with coolant and engine with engine oil.
13. Verify that there is no water leakage, oil leakage and exhaust gas leakage at each connection.