Esteem GLX Sedan Plus Water Pump TSB
Replace as necessary.
NOTE: Do not disassemble water pump to check the water pump impeller.
INSTALLATION
1. Install new O-ring to water pump.
NOTE: Do not forget to install dowel pins on water pump side before mounting water pump to engine block.
2. Install heater outlet pipe to water pump, then install water pump by using new bolts to cylinder block and tighten to specified torque.
NOTE: Use NEW bolts (total of 4. to install water pump to engine block. Failure to do so may result water leakage.
Tightening torque (a): 25 Nm (2.5 kg-m, 18.0 ft. lbs.)
3. Install A/C compressor to its bracket.
4. Install radiator referring to previous page.
5. Install heater outlet pipe bolt.
6. Install generator belt.
7. Install radiator outlet hose to thermostat cap.
8. Fill coolant.
9. Connect negative cable at battery.