Esteem GLX Sedan Plus L4-1.8L (1999)
Wheel Fastener: Service and Repair
Front
REMOVE AND INSTALL WHEEL HUB, WHEEL STUD/WHEEL BEARING OUTSIDE INNER RACE
REMOVAL
1. Hoist vehicle and remove wheel.
2. Uncalk drive shaft nut.
3. Depress foot brake pedal and hold it there. Remove drive shaft nut.
4. Remove caliper carrier bolts.
5. Remove caliper with carrier.
NOTE:
^
Hang removed caliper with a wire hook or the like so as to prevent brake hose from bending and twisting excessively or being pulled.
^
Don't operate brake pedal with pads removed.
6. Remove disc screws.
7. Pull brake disc off by using two 8 mm bolts.
8. Pull out wheel hub with special tools (A) and (B).
Special Tools
(A): 09943-17912
(B): 09942-15510 or equivalents.