suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Panel Illumination Control Module > < Symptom Related Diagnostic Procedures
Page 1
background image

Fuel Gauge Module: Component Tests and General Diagnostics

METER INSPECTION 

1. Remove rear seat.
2. Disconnect P/B lead wire going to gauge unit.
3. Use a bulb (12 V 3.4 W) in position to ground lead wire as illustrated.
4. Turn ignition switch ON. 

Make sure that bulb is lighted with meter pointer fluctuating several seconds thereafter. If meter is faulty, replace.

Panel Illumination Control Module > < Symptom Related Diagnostic Procedures