Esteem GLX Wagon Plus L4-1.8L (1999)
1. Check the none of following faulty conditions exists.
-
Bend, scratch, deformity in vehicle body mounted on SDM bracket.
-
Foreign matter or rust on mating surface of vehicle body mounted on SDM bracket.
-
Loosened GND screw.
2. Install SDM bracket and SDM to vehicle.
CAUTION: Ensure that arrow on SDM is pointing the vehicle.
3. Tighten SDM and SDM bracket screws to specified torque.
Tightening torque
(a): 6 Nm (0.6 kg-m, 4.5 lb-ft)
4. Connect SDM connector to SDM and be sure to lock each connector with lock lever.
CAUTION: As the is connector has a connector lock lever, refer to the figure for its installation procedure.
