Esteem GLX Wagon Plus L4-1.8L (1999)
When servicing, if shocks may be applied (eg., dropped from a height of 90 cm (3 ft) or more) to air bag system component parts, remove those parts
beforehand.
When using electric welding, be sure to disconnect air bag (inflator) module connectors (driver and passenger) respectively.
When applying paint around the air bag system related parts, use care so that the harness or connector will not be exposed to the paint mist.
Never expose air bag system component parts directly to hot air (drying or baking the vehicle after painting) or flames.
WARNING: When performing service on or around air bag system components or air bag wiring, follow the procedures listed in the following
pages to temporarily disable the air bag system. Failure to follow procedures could result in possible air bag system activation, personal injury
or unneeded air bag system repairs.
