Forenza L4-2.0L (2004)
Front Door Window Regulator: Service and Repair
Power Window Regulator Removal And Installation
Removal
1. Disconnect the negative battery cable.
2. Remove the door glass.
3. Disconnect the electrical connector.
4. Remove the nuts and the window regulator.
Installation
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent
premature corrosion.
1. Install the window regulator with the nuts.
Tighten:
Tighten the window regulator nuts to 8 Nm (71 in. lbs.).
2. Connect the electrical connector.
3. Install the door glass.
4. Connect the negative battery cable.