Forenza L4-2.0L (2004)
Rear Door Limiter: Service and Repair
Door Hold-Open Link Removal And Installation
Removal
1. Remove the door seal trim.
2. Remove the bolts on the door and on the body.
3. Remove the door hold-open link.
Installation
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent
premature corrosion.
1. Install the door hold-open link to the door and the body with the bolts.
Tighten:
Tighten the door hold-open link-to-body bolt to 25 Nm (18 ft. lbs.).
Tighten the door hold-open link-to-door bolts to 9 Nm (80 in. lbs.).
2. Install the door seal trim.