Forenza L4-2.0L (2004)
Convertible Top Deck Lid: Service and Repair
Rear Deck Lid Removal and Installation
Rear Deck Lid Removal and Installation
Removal
1. Disconnect the negative battery cable.
2. Disconnect the electrical connector.
3. Remove the electrical harness from the rear deck lid hinge arm.
4. Remove the bolts and the rear deck lid.
Installation
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.
1. Install the rear deck lid with the bolts.
Tighten: Tighten the rear deck lid bolts to 10 Nm (89 in. lbs.).
2. Install the electrical harness to the rear deck lid hinge arm.
3. Connect the electrical connector.
4. Connect the negative battery cable.
