Forenza L4-2.0L (2004)
2. Apply unlubricated compressed air at the hose inlet of the caliper.
3. Remove the piston from its bore and remove the piston dust seal.
4. Remove the inner seal from the bore. Avoid scratching the bore.
5. Remove the bleeder valve dust cap and the bleeder valve.
Assembly
CAUTION: Do not use a hone or any other procedure to remove material from the caliper bore or the piston.
1. Clean all parts in denatured alcohol or brake fluid. Dry the parts with unlubricated compressed air and blow out all passages in the housing and the
bleeder valve.