Forenza L4-2.0L (2004)
34. Install the oil pan retaining bolts.
Tighten: Tighten the oil pan retaining bolts to 10 Nm (89 inch lbs.).
35. Rotate the engine on the engine overhaul stand KM-412.
36. Install the rear timing belt cover.
37. Install the rear timing belt cover bolts.
Tighten: Tighten the rear timing belt cover bolts to 7 Nm (62 inch lbs.).
38. Install the crankshaft gear and bolt.
Tighten: Tighten the crankshaft gear bolt to 145 Nm (107 ft. lbs.) plus 30° plus 15° using the angular torque gauge KM-470-B.
39. Install the engine mount and retaining bolts.
Tighten: Tighten the engine mount retaining bolts to 45 Nm (33 ft. lbs.).
40. Install the timing belt automatic tensioner.
41. Install the timing belt automatic tensioner bolts.
Tighten: Tighten the timing belt automatic tensioner bolts to 25 Nm (18 ft. lbs.).
42. Install the timing belt idler pulley.