Forenza L4-2.0L (2004)
the piston.
17. Lubricate the cylinder wall and the piston rings with clean engine oil.
18. Install the piston using the universal piston ring compressor J-8037 and a wood handle. Guide the lower connecting rod end to prevent damaging
the crankshaft journal.
19. Install the connecting rod cap and bearings.
20. Install the connecting rod cap bolts.
Tighten: Tighten the connecting rod bearing cap bolts to 35 Nm (26 ft. lbs.). Using the angular torque gauge KM-470-B, tighten the bolts one turn
of 45° plus one turn of 15°.
21. Install the crankshaft bearing bridge/oil pan scraper bolts.
Tighten: Tighten the crankshaft bearing bridge/oil pan scraper bolts to 20 Nm (15 ft. lbs.) plus 45° using the angular torque gauge KM-470-B.
22. Install the oil suction pipe.
23. Install the oil suction pipe bolts.
Tighten: Tighten the oil suction pipe bolts to 8 Nm (71 inch lbs.) and the oil suction pipe bracket bolt to 6 Nm (53 inch lbs.).
24. Install the oil pan.
25. Install the cylinder head with the intake manifold and exhaust manifold attached.