Forenza L4-2.0L (2004)
18. Remove the engine mount.
Installation
1. Install the engine mount.
2. Install the engine mount retaining bolts.
Tighten: Tighten the engine mount retaining bolts to 45 Nm (33 ft. lbs.).
3. Install the timing belt idler pulleys.
4. Install the timing belt idler pulley bolt and nut.
Tighten: Tighten the timing belt idler pulley bolt and nut to 25 Nm (18 ft. lbs.).
5. Tension the timing belt by turning the timing belt automatic tensioner hex-key tab counterclockwise until the pointer is aligned to the indicator.
Tighten: Tighten the timing belt automatic tensioner bolt to 25 Nm (18 ft. lbs.).
6. Install the front timing belt cover.
7. Install the front timing belt cover bolts.
Tighten: Tighten the front timing belt cover bolts to 6 Nm (53 inch lbs.).
8. Install the engine mount bracket and retaining bolts.
Tighten: Tighten the engine mount bracket retaining bolts to 55 Nm (41 ft. lbs.).
9. Remove the engine assembly support fixture J-28467-B, and the channel X-28467-560.
10. Install the serpentine accessory drive belt.
