Forenza L4-2.0L (2004)
3. Install the oil pan retaining bolts.
Tighten: Tighten the oil pan retaining bolts to 10 Nm (89 inch lbs.).
4. Install the oil pan flange-to-transaxle retaining bolts.
Tighten: Tighten the oil pan flange-to-transaxle bolts to 40 Nm (30 ft. lbs.).
5. Install the exhaust flex pipe.
6. Install the exhaust flex pipe retaining nuts to the exhaust manifold.
Tighten: Tighten the exhaust flex pipe-to-exhaust manifold retaining nuts to 35 Nm (26 ft. lbs.).
7. Install the exhaust flex pipe retaining nuts to the catalytic converter or the connecting pipe.
Tighten: Tighten the exhaust flex pipe-to-catalytic converter or connecting pipe retaining nuts to 35 Nm (26 ft. lbs.).
8. Connect the negative battery cable.
9. Install the oil pan drain plug.
Tighten: Tighten the oil pan drain plug to 35 Nm (26 ft. lbs.).
10. Refill the engine crankcase with engine oil.
