Forenza L4-2.0L (2004)
10. Cap the openings to the compressor to prevent contamination.
Installation
1. Position the A/C suction hose into the vehicle.
2. Insert the suction hose block-to-compressor to the compressor.
Tighten: Tighten the suction hose block-to-compressor retaining nut to 33 Nm (24 ft. lbs.).
3. Install the suction hose support clamp-to-longitudinal member.
Tighten: Tighten the suction hose support clamp-to-longitudinal member bolt to 4 Nm (35 in. lbs.).
4. Install the suction hose support clamp-to-engine bracket.
Tighten: Tighten the suction hose support clamp-to-engine bracket bolt to 14 Nm (10 ft. lbs.).
